How to Hang an Eclipse Clock CB2

104 84
    • 1). Locate a stud in the wall using a stud finder; this is where to hang the clock if the wall is sheetrock. If a stud finder is not available simply rap on the wall with your knuckles until you locate a stud. Areas with no studs will sound and feel hollow when tapped, whereas an area where there is a stud will feel solid to the touch and will not echo when tapped.

    • 2). Select the desired height to hang the clock.

    • 3). Tap the edge of a 3-inch mounting screw lightly with a hammer to start it, and then drive the screw the rest of the way in with a Phillips screwdriver. Use masonry screws and a hammer to install if the wall is masonry.

    • 4). Align the back mount hanger with the screw and set the clock down onto the screw.

Subscribe to our newsletter
Sign up here to get the latest news, updates and special offers delivered directly to your inbox.
You can unsubscribe at any time

Leave A Reply

Your email address will not be published.

"Society & Culture & Entertainment" MOST POPULAR