- 1). Print out your designs in actual size. Starch the fabric that you will be embroidering on. Thread your embroidery machine with the colors of threads that you have chosen for your design according to manufacturer's instructions. Place 75/11 embroidery needles into your embroidery machine.
- 2). Choose an Endless Embroidery Hoop in the correct size for the job that you will be embroidering. Make sure that it is large enough to fit your entire design in it.
- 3). Set up your design where you would like for it to first be stitched. Embroider this section using your embroidery machine. Set up the second part of the design by lining it up next to the first. Place the embroidery needle to the extreme left of the first design. If possible, use the scooter buttons to adjust the needle so that it begins exactly where the first section left off.
- 4). Repeat this process until your design is the length that you desire. Add further designs by repeating the above steps until your embroidery job is completed.
- Advertisement -
- Advertisement -