- 1). Remove the single fastener screw found in the bottom (between the two prongs) of the encasement using a screwdriver.
- 2). Pull the front of the encasement (the labeled side) off the pronged portion of the receiver. Look for a black switch (located on the bottom edge of the circuit board) with "10K" and "7K" printed to the left of it.
- 3). Slide the black switch vertically to change the receiver's frequency between 7K and 10K. (These numbers refer to the frequency band of the radio signal.)
Subscribe to our newsletter
Sign up here to get the latest news, updates and special offers delivered directly to your inbox.
You can unsubscribe at any time
Next Post