- 1). Thread your machine like normal through the needle and bring the thread under the presser foot. Put your bobbin onto the bobbin winding spindle along the right side of your machine below the hand wheel.
- 2). Pull on the lower portion of the bobbin winding arm on the side of the machine and turn it into position. Lift the presser foot and pull your thread toward the bobbin winding arm and through the groove on the arm.
- 3). Wrap the bobbin with thread counterclockwise starting from underneath the bobbin a few times and hold the tail of the thread between your fingers. Press the foot pedal lightly to begin winding the bobbin. Let go of the thread tail after a few seconds.
- 4). Replace the bobbin in the machine after it is full and push the bobbin winding arm back in place to engage the needle.
- 1). Thread your machine through the needle like normal and pull the tail under the presser foot. Place your empty bobbin on the bobbin spindle on the front of your machine to the right of your spool of thread.
- 2). Hold your thread and bring it from under the presser foot and over the thread guide located to the left of your spool across from the bobbin. Wind the thread clockwise onto your bobbin a few times by hand.
- 3). Hold the tail of the thread between your fingers and push the bobbin spindle down to engage it. Press the foot control lightly to begin to wind the bobbin. Let go of the thread after a few seconds.
- 4). Replace the bobbin in the machine once it is full of thread and push the bobbin spindle back up to re-engage the needle.
- Advertisement -
- Advertisement -