Swanstone Sink Repair
- 1). Wet the sink to lubricate the surface for an even result.
- 2). Scrub the scratch with a no-scratch, plastic abrasive pad to remove light scratches.
- 3). Scrub the scratch with a piece of 400-grit wet/dry sandpaper if the scratches are still visible. Slowly work the area around the scratch to blend with the rest of the sink. Use light pressure at first, then work to heavier pressure until the scratch is gone.
- 4). Scrub the scratch with a plastic no-scratch abrasive pad. This will smooth out the area and blend it with untouched areas on the sink.
- 5). Rinse the sink with clear water.