How to Run Electrical Wire to a Garden Fountain

104 15
    • 1). Figure out where you want your garden fountain and set it down. Keep in mind that a garden fountain will be a focal point for anyone who visits your garden, so put it in a prominent place.

    • 2). Locate an outdoor electrical outlet. If you don't have one, have an electrician install one. Make sure it has a Ground Fault Circuit Interrupt (GCFI) outlet, which will shut off the pump in the event of a short. Also make sure there's a plastic or metal cover over the outlet to protect it from the weather.

    • 3). Measure the distance from the garden fountain to the outlet, in a straight line.

    • 4). Dig a trench a foot deep and four inches wide from the outlet to the fountain. Save the dirt or chunks of lawn you remove with your trowel or shovel and set them aside, along the trench.

    • 5). Cut your PVC pipe to match the length of the trench, using a saw.

    • 6). String the extension cord through the pipe, again making sure it's long enough to reach from the outlet to the fountain. Push it through the pipe, and use gravity to make it a little easier, particularly if it's a long pipe. Connect one end to the fountain and plug the other end into the outlet to make sure everything works.

    • 7). Drop the pipe into the trench, with the cord inside of it, and bury with the dirt or grass chunks you removed. Walk over the surface when you've finished. Your cord should be buried, except for a brief section at either end extending to the plug and to the fountain.

Subscribe to our newsletter
Sign up here to get the latest news, updates and special offers delivered directly to your inbox.
You can unsubscribe at any time

Leave A Reply

Your email address will not be published.

"Home & Garden" MOST POPULAR