Hard-Bodied Dolls
- 1). Take the sound unit and center it on the tummy of the hard body.
- 2). Use a pencil with soft lead and trace a line around the unit onto the body.
- 3). Stay on the inside of the pencil line that you made, and use a cutting wheel on a Dremel (or a similar tool) to cut the "plug" out.
- 4). Smooth the edges around the opening with a polishing wheel.
- 5). Make sure the box is activated and the batteries are fresh.
- 6). With the activation button toward you, place the sound unit into the hole that you just made. It should be snug, but should not have to be forced.
- 7). Make a rope out of two-part epoxy putty. Place the "rope" around the sides of the box, and gently press into the opening. The putty will ooze out.
- 8). Use a damp popsicle stick to smooth the excess putty around the opening. Make it as smooth as possible.
- 9). Allow to dry fully according to the manufacturer's directions.
- 10
Sand away excess putty and touch up the paint if desired.