How to Make Mouse Sander Refills

By Society & Culture & Entertainment Last updated Wednesday, July/10/2024

1). Place the felt paper on a flat work surface. Trace around the used mouse sander sandpaper refill to attain the proper shape for each homemade refill. Cut the sandpaper refill shapes from the felt paper.
2). Cover a flat work surface with newspaper. Place the cutout felt paper shapes on the newspaper so the smooth side is facing up.
3). Apply a liberal layer of hide glue on the smooth side of each felt paper shape with a sponge brush. Allow the hide glue to dry to a gel consistency. This will take approximately 15 minutes.
4). Sprinkle a liberal amount of the carbide grit over the gel. Allow the gel to harden completely. This will take from one to two hours.
5). Pick up the corner of one mouse sander refill. Gently tap the edge over the newspaper to remove excess carbide grit. Store the finished pieces of mouse sander refills in a flat, dry location.
6). Pour excess carbide grit back into the carbide grit container for future use.

Stay informed and read the latest news today from The ThatBiz Online, the definitive source for independent journalism from every corner of the globe.