Stihl 009L Specs
- Stihl 009L cutters have an all position diaphragm carburetor and an integral fuel pump. The air filter is a washable, replaceable large area felt mat. This unit uses an electronic magneto ignition with an electrode gap that measures 0.02 inch and a spark plug thread that is 0.37 inches long. The spark plug is either a Bosch WSR 6 F or a NGK BPMR 7A. This chainsaw weighs 9 lbs. without the bar and chain.
- The Stihl 009L chainsaw utilizes a single-cylinder, two-stroke motor. This engine has a power output of 2 hp and a maximum speed of 10,500 rpm. The bore of the cylinder measures 1.5 inches in diameter and the stroke is 1.42 inches in depth. This unit has a displacement of 40.8 cubic centimeters. The engine requires a fuel blend of gasoline and 50-to-1, two-stroke oil at a ratio of 1 gallon of gasoline for every 2.6 oz. of oil. The fuel tank contains up to 0.61 pt. of liquid.
- Stihl 009L saws have a STIHL low kickback chain and a STIHL reduced kickback bar. The bar is a Rollomatic model with a sprocket nose, measuring 12, 14 or 16 inches in length. The chain is a Picco-Micro1 with a pitch of 0.375 inch and a six-tooth or seven-tooth chain sprocket. The cutting attachment has a fully automatic oil pump that lubricates the chain. The oil tank has a maximum capacity of 0.49 pt. of lubrication. This saw is also compatible with Picco-Micro chains.
- The Stihl 009L uses a pull starter to ignite the engine and has a choke control for starting under cold conditions. A throttle trigger adjusts the speed of the engine after the throttle trigger interlock is depressed. The hardware has a stop switch and a chain brake that halts the movement of the chain in the event of kickback. This model has a rear hand guard, a front hand guard and a chain catcher that helps protect the operator against a broken or flying chain.