How to Create Your Own Bumper Stickers

104 56
    • 1). Place the bumper sticker paper into the paper feeder of your printer, most commonly located at the top. Print your chosen image directly onto the bumper sticker paper. If the image appears too big for the paper you are using, select "Properties" next to the title of your printer on the print dialog box. Click the tab titled "Layout" and select "Advanced". From here, select the appropriate size in accordance to what image you will be printing. You will need to use your printers' specific software for additional adjustments. By using this software, you will be able to print on both bumper stickers at the same time, adjust the size of both images, and flip them accordingly.

    • 2). Allow the paper to dry for 20 minutes after you have successfully printed your bumper sticker. Rinse the paper off under cold water to remove extra ink and to prevent it from running once placed on the vehicle. Let the bumper sticker dry again after rinsing.

    • 3). Cut the image out carefully using your scissors. Place the laminate over the front of the bumper sticker and push all of the air bubbles out using your fingers or a plastic card. Allow the laminate to adhere for 45 minutes.

      If you are using a UV spray, completely saturate the front of the bumper sticker and allow it to dry 2-3 hours before placing it on your vehicle to prevent fading.

Subscribe to our newsletter
Sign up here to get the latest news, updates and special offers delivered directly to your inbox.
You can unsubscribe at any time

Leave A Reply

Your email address will not be published.