Using a Wireless Router

• 1). Ensure that your computer's wireless card is active and that your wireless router is turned on. Insert the HP setup CD provided with your printer (if using a Mac, connect the USB cable first). When the CD menu appears, click "Install Network/Wireless Device." Follow the installer's prompts.
  
  
• 2). Connect the USB installer cable to your computer and printer when the installer prompts you to do so.
  
  
• 3). Click "Finish" to complete the install, open a document, and print it.
  
  

Using an Ad Hoc Network

• 1). Ensure that both your computer's and your printer's wireless signals are active. (This is usually indicated by a lighted "radio tower" icon or similar symbol.)
  
  
• 2). Open your computer's control panel and select "Network and Internet."
  
  
• 3). Click on "Connect to a Network," located under the "Network and Sharing Center" heading.
  
  
• 4). Select the network "hpsetup" from the list of available networks.
  
  
• 5). Install the printer software using the steps from Section 1. Open a document and print a test page.