Design Ideas

• 1). Stand at the door of the room you want to transform. Using a tape measure, determine the length of the walls and the height of the ceilings and then, using a ruler, draw out your current floor plan. Note the colors of the walls and then think about what you'd like to change in the room.
  
  
• 2). Create a focal wall by painting it a darker color than the rest of the room. Choose a wall that you want to feature such as the headboard wall in a bedroom or the wall that is first seen in a living room. An easy tip is to use two colors from the same paint strip. The closer they are to each other, the more subtle the effect.
  
  
• 3). Paint a dramatic, dark color on one or more walls and then paint the woodwork, doors or cabinets in white or cream. The contrast will show off the hue and the lighter trim will provide a bit of relief from the intensity of the color.
  
  
• 4). Bring a long, narrow room into balance by painting the two short walls a darker hue than the longer walls. Use both colors in accent pillows and rugs for a pleasing palate.
  
  
• 5). Help a long hallway advance by painting the wall at the end of the hallway a darker color. Using warm colors will also help walls advance. Cool colors recede.
  
  
• 6). Paint vertical stripes on your walls in two different colors to make the ceiling appear higher. Paint the lighter color all over the wall and then tape off the stripes and paint every other one.
  
  
• 7). Cozy-up a large room with high ceilings by using a darker hue on the ceilings and a lighter color on the walls. For ceilings over 10 feet high, paint the crown molding the same color as the ceiling.
  
  

Practical Tips for Painting a Room with Two Colors

• 1). Paint the lighter color first if you're adding stripes or a focal wall to a room. If you're adding paint to a ceiling, paint that before the walls, whether it's a darker or lighter tone.
  
  
• 2). Use painters' tape once the first coat of paint is completely dry. Drying paint usually requires four hours, but check the instructions on your paint can.
  
  
• 3). Burnish the painter's tape with a small putty knife to be sure you get a clean line. If you're adding a focal wall, and have painted surrounding walls a lighter color, then place the tape in the corner of the walls you've just painted to keep them from getting spots of your darker paint color on the light walls. Remove the tape while the paint is still wet.
  
  
• 4). Mark the wall for stripes. Use a a tape or pencil to indicate the width of your stripes at the ceiling and the baseboards. For example if you are creating 10-inch stripes, starting at the left side of the wall, leave marks at 10 inches, 20 inches, 30 inches and so on down the wall at the top and bottom.
  
  
• 5). Use a plumb line and chalk to tape off stripes for an even, professional looking finish. Burnish the tape well to make sure paint doesn't seep under the tape. Put a small piece of tape in every other stripe to remind yourself that you won't be painting those. Place painter's tape on the inside of the marked stripes, being careful to keep the lines next to the chalk lines you created. Paint the darker color.