- 1). Remove the nozzle guard by unplugging the vacuum and turning it over. The base should be flat. Remove the two screws near the rollers. If you see two more screws at the back of the nozzle guard, remove them too. Release the two hooks on the nozzle guard by pushing outwards. Push up on the back of the nozzle guard to release it.
- 2). Remove any belt debris, and lift and remove the brush roll.
- 3). Pass the brush roll through the belt, and slot the belt into the part of the brush roll where there aren't any bristles. Lock the belt around the motor shaft.
- 4). Re-insert the brush roll into the side holder using the arrows on the brush end caps as a guide. Turn the brush roll by hand to make sure that the belt moves freely, then reassemble the nozzle guard, matching the tabs to the slots on the nozzle base first.
- Advertisement -
- Advertisement -
EDITOR PICKS & Articles
- Self-Fulfilling Prophecies - How Do They Fit Into Our Lives?
- Manifesting Your Power to Create Your Own Wealth
- What You See Is What You Get!
- The Salve of Tolerance
- 5 Secrets On The Importance Of A Coach
- Are You Failing in the Present?
- How to Make BIG Changes in your Life When you are Stuck!
- Guidelines For Living
- How to Get Your Way and Come Out Unscathed
- Don"t Wait - Celebrate!
Subscribe to our newsletter
Sign up here to get the latest news, updates and special offers delivered directly to your inbox.
You can unsubscribe at any time
Next Post
"Home & Garden" Categories
Stay With Us
"Home & Garden" MOST POPULAR
"Home & Garden" Lastest Articles