Home & Garden Home Appliances

Leveling the Rear Wheels of a GE Refrigerator

By Home & Garden Last updated Wednesday, May/29/2024

1). Unscrew or simply pull the grille straight out from the bottom of the refrigerator. Open the refrigerator doors.
2). Look beneath the doors, near the front wheels for the case leveling screws.
3). Insert a 3/8 socket wrench or flat-head screwdriver into the screw head. Twist the screw clockwise to raise or counterclockwise to lower the corner of the refrigerator. Repeat on the opposite side.
4). Position the front of the refrigerator 1/4 inch higher than the rear. If a back wheel is raised too much, lower the front wheel on the same side. Adjust the opposite front wheel to compensate for the difference.
5). Close the refrigerator doors and replace the grille.