How to Remove an Ignition Coil From a '98 GSR
- 1). Locate the distributor cap on the engine. It is on the passenger side, with all of the spark plug wires leading into it. Remove the cap using the Phillips-head screwdriver.
- 2). Locate the ignition rotor on the center of the distributor, which is a fan-shaped object with a metal tip. Remove this with the Phillips-head screwdriver. Remove the underlaying cover, again using the Phillips-head screwdriver.
- 3). Remove the screws holding the wiring to the coil.Then remove the coil from the housing. Pull the coil out of the housing.