- 1). Remove the tail light lens using the Phillips head screwdriver. Four screws that go around the perimeter of the lens hold it in place.
- 2). Pull out the tail light assembly and remove the bulbs by twisting them out of the sockets with your hands.
- 3). Place the tall light assembly on a work surface and locate the channel where the rubber seal goes. This is where leaks will form, and it's where you'll apply the silicone.
- 4). Apply the silicone into the channel where the rubber seal goes, with the rubber seal in place. Don't overdo it, or you'll be spending a lot of time cleaning up.
- 5). Carefully put the light sockets back into the tail light assembly and put it in the mounting spot. Place the tail light lens over the assembly and screw the lens back in place with the Phillips head screwdriver.
- 6). Tighten the screw and be careful to note how much silicone is pressing out of the housing. Use the paper towel and your hand to clean up any excess silicone, and if you have to, a little bit of water to help clean. Allow the silicone to dry for an hour before washing or cleaning the vehicle.
Subscribe to our newsletter
Sign up here to get the latest news, updates and special offers delivered directly to your inbox.
You can unsubscribe at any time