- 1). Clean the shower stall thoroughly. Depending on the condition, this may require nothing more than a good foam bathroom cleanser and a wet sponge. Cleaning the interior of the shower will make it much easier to spot any defects that need to be addressed.
- 2). Check the tiles. This includes looking for any breakdown in the grout in between the tiles as well as making note of hairline cracks in any of the tiles. While small imperfections, these types of issues can allow water to seep into the underlying wall. Replacing the cracked tiles and filling in any gaps in the grout will help prevent larger problems.
- 3). Inspect the seals between the tub and the tiles. Just as with the grout, if the seal between the edge of the bath tub and the bottom of the tiles is not complete, water damage can occur. Fill the space with caulk and then overlay with grout.
- 4). Test the sliding doors on the stall. Most enclosed stalls with sliding doors are equipped with two doors. Often, people tend to use one door but never move the other one. Routinely slide both doors the entire length of the guide rails, as this will help to prevent the buildup of mineral deposits on the rails and keep them from deteriorating.
- 5). Make sure the drain is working properly. If the drain appears to be slow, try using a plumbing snake to clear the drain of any buildup. The snake will help to clear the plumbing of blockages and ensure water drains from the space properly.
- Advertisement -
- Advertisement -