How to Change the Taillights on a 2005 VW Convertible Beetle

104 41
    • 1). Open the cover that covers the tail light assembly. With the hatch open, pry a flathead screwdriver in between the plastic cover and the lining of the hatch. The plastic cover will pop off and expose the light assembly, which is a plastic circle.

    • 2). Pull the plastic round light assembly out partially. You may need to pry it off gently with the screwdriver.

    • 3). Turn knob that is exposed when you remove plastic circle in a counterclockwise direction. The knob holds the tail light assembly in the car.

    • 4). Pry the taillight off the back of the Volkswagen. Use the flathead screwdriver or a non-marring tool and wedge it under the bottom of the tail light. Move the tool around the lens to loosen it and pull off the Beetle.

    • 5). Remove the bulb socket from the assembly by pulling straight out.

    • 6). Pull bulb straight out of socket and replace with new bulb. Take care not to touch new bulb with bare hands, wear gloves or use a rag. The oil from skin can cause the bulb to heat unevenly when in use and crack.

    • 7). Push bulb socket back into assembly. Replace assembly into car by pushing in until you hear a click or popping noise that indicates it is secure.

    • 8). Screw knob back into the inside of car to secure light assembly.

    • 9). Replace the plastic circle that covers the assembly in the back and place plastic cover back onto the vehicle.

    • 10

      Check the bulb by turning on car and making sure it is functioning properly.

Subscribe to our newsletter
Sign up here to get the latest news, updates and special offers delivered directly to your inbox.
You can unsubscribe at any time

Leave A Reply

Your email address will not be published.