Technology Electronics

How to Remove Door Speakers in a 2001 Accent

By Technology Last updated Tuesday, October/01/2024

1). Pry off the triangular panel at the front top edge of the door panel, using the tip of a panel tool.
2). Remove a single Phillips screw from the center of the trim piece backing the door release handle, using a Phillips screwdriver.
3). Pry out two rubber grommets in the door pull-handle's recesses with the tip of a flat-blade screwdriver. Remove the Phillips screws underneath the grommets.
4). Remove five Phillips screws located along the lower and back edge of the door panel.
5). Pry around the perimeter of the door panel with a panel tool. Lift the panel up and off the door.
6). Remove four Phillips screws from the perimeter of the speaker. Pull out the speaker and disconnect the speaker wires plugged into the back.
7). Repeat the previous steps for the other door.