How to Replace a Window Lift Motor in a Ford F-250

104 26
    • 1). Remove the two Phillips screws in the truck's armrest, as well as the one screw securing the door handle. Remove any other screws that may be in the outside edges of the door panel.

    • 2). Lift the door panel straight up to unhook the inverted hooks on the panel from their holes in the door.

    • 3). Pull the door panel away from the door far enough to disconnect the electrical connector from the window switch. Remove the moisture shield. Disconnect the electrical connector from the window motor.

    • 4). Using a ¼-inch drive socket, pull out the bolts securing the window motor to the regulator.

    • 5). Install the new motor to the window regulator. Put the bolts in and tighten them.

    • 6). Reconnect the electrical connector.

    • 7). Reassemble the door panel in reverse order of removal.

Subscribe to our newsletter
Sign up here to get the latest news, updates and special offers delivered directly to your inbox.
You can unsubscribe at any time

Leave A Reply

Your email address will not be published.