Technology Electronics

How to Replace a Dish LNB With a Mount Bracket

By Technology Last updated Tuesday, May/28/2024

1). Loosen the front-end screws on the lateral arm of the antenna in order to make it easier to attach the LNB unit into the LNB slot.
2). Loosen the screws of the mount bracket that is secured around the LNB unit. This will allow the LNB unit to attach to the lateral arm appropriately.
3). Connect the LNB unit to the dish antenna's lateral arm, plugging the two or four metal connector plugs on the bottom end of the LNB unit to the metal connector ports on the front of the lateral arm.
4). Tighten the screws on the lateral arm and the screws on the mount bracket to secure the LNB unit into place.